Coventry Recreational cyclist
- Fender stay to frame / fork mountings are neat. Seems secure once fitted and adjusted.
- 'Plug and play' is misleading. Takes some time to fit and adjust.
The 'D' bolts in the parts list were missing from my set.
My Diverge has a carbon fork, so a threaded insert (vertical) rather than the two holes shown in the instructions - so the rivets on the L bracket needed drilling to enable removal.
The seatstay hole also requires drilling in the rear fender (this is part of the instructions).
Both sets of fender stays needed shortening - I used a hacksaw and a file to tidy up.
Published on: 20 March 2016