Now with 15QR x 110 Boost axle options.
Designed for the aggressive trail rider, the Factory Series 34 features a FIT4 damper, FLOAT air spring, and super lightweight chassis. Starting at only 3.92 pounds, the 34 gives proven trail performance that instills confidence and control.
- FIT4 or GRIP three position damper for improved control
- 15QR x 110 Boost and 15QR x 100 axle options
34 27.5+ forks are built for larger tires and a sense of adventure.
Fitting up to a 3.25" tire for increased traction and adapting the wider 15x110mm hub for a stiffer wheel, these forks cater to a new riding segment without all the fat.
- Specific 27.5+ chassis design
- FIT4 damper
- FLOAT air spring
- 15x110mm wide hub interface
Travel Options: 140
Air Spring Models: FLOAT
Damper Options: FIT4 3-Pos Lever w/adj
Axle Options: 15QR x 110 Boost
Upper Tube Finish: Kashima Coat
Steerer Options: 1.5 Taper
NEW FOR 2017
Inspired from moto, the new GRIP damper uses our FIT sealed cartridge technology combined with a coil-sprung, independent floating piston. GRIP allows excess oil to purge through specially designed ports at the top of the damper to maintain consistent damping and increase durability. Performance Series forks give Open, Medium, and Firm modes with additional micro-adjust between settings.
Boost 110 wide axle option now available for 32, 34, and 36 fork families.
FOX Isolated Technology
Now in its fourth generation, our patented FIT4 (FOX Isolated Technology) closed cartridge system provides three on-the-fly compression damping positions—Open, Medium, and Firm—to adapt to varying trail conditions. Factory Series forks feature an additional 22 clicks of low-speed compression adjust in the Open mode, allowing riders to fine-tune their exact damping preferences.
The FIT4 cartridge damper was redesigned based on our award-winning HSC/LSC damper, resulting in a much higher performing damper across all forks. This year, the FIT4 damper received an updated tune that provides more sensitivity while maintaining support.